| |
Correspondence Course on Process Equipment & Pressure Vessel Technology
(Available Whole of the Year 2006-2007 Four months Duration)
Need for the course on Process Equipment & Pressure Vessel Technology in form of
distance learning has been felt since long by the prospective and existing
process equipment professionals. We have been actively involved in training
engineers related to Piping, Process Equipments, Material Handling, Materials
Technology, etc. since last 18 years. This correspondence course will initiate
you to prepare and develop equipment data sheet, sizing of process equipments,
design them as per relevant codes, prepare fabrication details and
specifications, estimation and quality assurance during fabrication and
assembly.
This correspondence course will target the following needs of the existing and
prospective process equipment engineers:
Documentation related to Process Equipment Technology, in form of courseware.
Interaction with professionals on regular basis using internet technology. Case
Analysis / Problem Solving Methodology. Free Flow of Information to the
Engineers with the help of email newsletter.
Coverage:
-
Process Equipment & Pressure Vessel
Technology
-
Introduction about process Industries
-
List of Equipments used in Industries,
their introduction, applications
-
Indian process plants, fabricators,
engineering companies, consultants
-
Basic Engineering Knowledge on
Engineering materials, Strength of materials
-
Introduction of Standards and other
codes related to Pressure Vessels & Process Equipments, (ASME Sec.VIII
Div.1, Sec II, Sec IX; IS 2825, TEMA, API 650
etc.)
-
Design and Analysis of Pressure
Vessels & Components
-
Design & Analysis of Heat Exchangers
-
Design & Analysis of Storage Tanks
-
Selection of materials for process
equipments
-
Fabrication of process equipments;
plate forming, cutting, welding
-
Exposure to Pressure Vessel Design
Softwares (Compress, TEMA/ ASME Exchanger) , Local Stress Analysis at Nozzle
Vessel Junctions softwares (WinNozl) and others Problem Solving Sessions
Inspection & Testing :
Quality control and assurance for raw materials, components and fabrication
stages
Pressure Testing/ Special Testing for Pressure Vessels, process equipments &
systems
Non Destructive Examination of equipments
Methodology:
Technical Course Materials shall be regularly distributed, each fortnight,
through registered post parcel or through email (you can choose your option).
Problem Solving sessions will be held through emails. Case Studies shall
be sent for study and participants shall be asked to submit their solutions.
This will allow us to rate the progress of the participants and provide
suggestions for improvements. Monthly tests will be conducted and results shall
be immediately mailed so that participants are able to gauge their progress, and
adopt corrective means to improve on their weak areas of understanding.
Every participant must have an email ID for effective interaction.
Who should attend :
This program is useful for fresh & experienced engineers or engineers desiring
to shift to process equipment and pressure vessel engineering disciplines. Till
date, engineers from ENGINEERS INDIA, FURNACE FABRICA, GAIL, GRASIM, GSFC, IFFCO,
IPCL, KIRLOSKAR, KTI, L&T LTD, L&T NIRO, MOTHER DAIRY, PRAJ, PARAMOUNT, STERLING
GELATIN , SULZER , SEARCH CHEM, SG ENTERPRISE, SPIM ENGG, SGS INDIA, TRANSPEK,
TATA STEEL, THAPAR CENTRE IRD, VA TECH WABAG , OMAN REFINERY, QATAR PETROCHEM
and many other individuals have benefited from our regular courses. The course
is continuously revised for the updated technology.
Duration : Approximately 4 Months.
Fees : US $ 600 , Courseware to be sent in Electronic Format (through
email).
>>Click here to register
now<<
|
|
