| |
|
|
|
 |
Correspondence Course on
Piping Technology
(Available for Whole Year 2006-2007 Four months Duration)
Need for the course on Piping Technology in form of distance learning i.e.
through correspondence has been long felt by the prospective and existing piping
professionals. We have been actively involved in training engineers related to
Piping, Process Equipments, Material Handling, Materials Technology, etc. since
last 18 years. This correspondence course will initiate you to prepare and
develop plot plans & equipment layouts so that you can attempt to prepare the
piping layouts, their sizing, selection of components, design analysis and
finally to understand the need of documents for piping erections, assembly,
testing and inspections.
This correspondence course will target the following needs of the existing and
prospective piping engineers. Documentation related to Piping Technology in form
of courseware. Interaction with piping professionals on regular basis using
internet technology. Case Analysis / Problem Solving Methodology Free Flow
of Information to the Piping Engineers with the help of email newsletter.
Coverage Piping
Technology
-
Introduction about Process Industries
worldwide
-
List of Piping components used in
Industries, their introduction, applications.
-
Local process plants, fabricators,
engineering companies, consultants, and site Erection contractors.
-
Basic Engineering Knowledge on
Engineering materials, Strength of materials, Fluid Mechanics etc.
-
Understanding of Process Flow, P&I
Diagrams, Interpretations, Plot Plan & Equipment layout generation.
-
Introduction to ASME B31.3, B31.4,
B31.8 and other codes related to Process Piping and Pipelines.
-
Selection of Piping Components
(Flanges, Fittings, Valves, Supports, Expansion Joint etc.)
-
Selection & Application of Pumps.
-
Selection & Application of Compressor.
-
Piping Plan, Pipe Sizing, Development
of Isometric drawings.
-
Flow and Pressure Drop Calculations.
-
Selection of Materials for Process
piping components.
-
Stress Analysis, Flexibility Stress
Analysis.
-
Fabrication, including Welding,
particularly for piping components.
-
Introduction to Piping Flow and
Pressure Drop Evaluation & Stress Analysis Software.
-
Inspection & Quality Control
-
Quality control and assurance for raw
materials, components and during erection stages
-
Special Testing for Piping systems.
-
Non Destructive Examination of piping
Methodology
-
Technical Course Materials shall be
regularly distributed, each fortnight, through registered post parcel or through
email (you can choose your option).
-
Problem Solving sessions will be held
through emails.
-
Case Studies shall be sent for study
and participants shall be asked to submit their solutions. This will allow us to
rate the progress of the participants and provide suggestions for improvements.
-
Monthly tests will be conducted and
results shall be immediately mailed so that participants are able to gauge their
progress, and adopt corrective means to improve on their weak areas of
understanding.
-
Every participant must have an email
ID for effective interaction.
Who should attend
This program is useful for fresh & experienced engineers or engineers
desiring to shift to piping engineering disciplines. The course is continuously
revised for the updated technology.
Duration: Approximately 4
Months.
Fees : US $ 600, Courseware to be sent in Electronic Format (through
email)
>>Click here to register
now<<
|
|
